My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

C3553_large_green_light_strip

More Views

Green Flexible LED strip - 30 way

6.5
Green Flexible, energy efficient, LED Strips available in 0.5m and 5m in length with adhesive backing. 3 LEDs per 5cm length. They run off a 12V Power Supply.

Availability: In Stock.

* Required Fields

Product versions:

This product is also available in the following versions:

Stock code
Description
Price
3553
Green Flexible LED Strip - 30-way, 0.5m
£6.50
3553-5M
Green Flexible LED Strip, 5m reel
£30.00

Use the drop down list above to select your option. Price shown is GBP (ex VAT). Local currency price and price breaks (if applicable) will be shown once you have chosen an option.

Product description:

These green energy efficient flexible LED strips are extremely versatile. They can be used in a wide range of lighting applications and products. The strips are adhesive backed and run off a 12DC supply.

  • Based on a 3528 surface mount LED.
  • Runs from 12V DC supply.
  • Supply current = 200mA per 0.5m length.
  • Adhesive backed.
  • Strips can be cut into shorter lengths. Cut points every 5cm.
  • Three LEDs per 5cm section.
  • Multiple sections can be soldered together to make longer lengths.
  • Tape width 8mm.
  • Thickness 0.2mm + LED height (approx. 1.8mm).
  • LED output 800 - 900 (lm).

Note: Though these strips are very flexible, care should be taken not to bend them around very sharp corners/angles as this may cause them to become damaged. A maximum length of 5m should not be exceeded when connecting these strips in series.

Click here to download the datasheet for this partpdf_icon.gif

Flexible LED Strips demo
Video Flexible LED Strips Demo
Flexible LED Strips demo video.
Ask Kitronik LED Strips
Video LED Strips
A video about our LED Strips taken from our Ask Kitronik Live event 2012.

Questions:

Posted by Liam Sinclair, Monday, 21 March 2016 on product Green Flexible LED strip - 30 way

Question:

I have been trying to solder wires to the pads on the end of a strip of the LEDs but the solder has not been sticking to the pads even when I tried to solder it directly so my question is how do you solder wires to the pads. Thank you in advanced

Answers:

  • Posted by Michael Lockhart on Monday, 21 March 2016

    There shouldn’t be any reason why the solder isn’t sticking. The best option is to check your soldering iron is hot enough to heat the pad and melt the solder, and also that your soldering iron is clean.

Need a question answering before you buy? Then ask our technical team.

Ask Your Question

* Required Fields

Related Products