My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

0

Fault Finding in E-Textiles

Below is a list of common faults that can stop your final circuit from working.

e_textile_fault_finding_01

Thread touching / shorting.

It is important to ensure that the positive and negative connecting pieces of conductive thread aren't touching each other. If they do the battery will be shorted which will prevent the LED from lighting up.

It is a good idea to fix or stitch the pieces into place so that no loose pieces can accidently touch.

e_textile_fault_finding_02

LEDs connected backwards.

If the LED is connected backwards then it will not work.

Check the following:

  • The long leg of the LED connects to the positive piece of thread.
  • The flat on the LED connects to the negative piece of thread.
e_textile_fault_finding_03

Thread connections not tight enough.

If the point at which the thread connects to a component is not tight enough, the circuit may not work at all, or it may work in an inconsistent manner.

The image left, shows an example of a good connection and a bad connection.

e_textile_fault_finding_04

Battery insertion.

If the battery is not inserted correctly, the power to the LEDs will be in reverse and they will not work.

As shown in the picture to the left, both the top of the battery and the top of the coin cell retaining clip are marked with a '+' (positive) sign. The battery should be inserted so that they match.

 

Download a pdf version of this page here pdf_icon.gif

Learn more about the author

Materials, Perspex. Plywood, Polypropylene
← Previous Post Next Post →

Leave a Reply