My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.



More Views

Single Material Dual Nozzle Head

DISCONTINUED - Robox Dual Nozzle 3D Print Head. Prints up to 300% faster than competitors & features dual 0.3mm and 0.8mm nozzles. Designed for use with CEL Robox 3D Printer.

Availability: Out of stock

Code 1+
incl VAT

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

Featuring a dual-nozzle system to ensure print speeds up to 300% faster than the closest competitors, the Robox Dual Nozzle 3D Printer Head allows adjustment of the individual nozzles temperature as well as the depth of fill, providing you with complete control of every stage of the printing process and quality.

The dual nozzle system is designed for faster printing and a wide range of resolutions. The Dual-Nozzle (single material) head with 0.3mm and 0.8mm nozzles, allows the printer to print from 20 microns (fine) to 800 microns (fast).

You can pause and resume and have the ability to change colour during a print, move the head around, just press resume and Robox will continue where it left off. If anything goes wrong mid-process, you can rectify issues without losing the print.

The nozzle valve system reduces blobs and stringing of filament from the print head, which helps improve print quality.

How Does the Printer Head Work?

The Robox is an extrusion style 3D printer. It works by forcing the print material, referred to as 'filament', through a heated nozzle. The filament then melts (this process is very similar to the way a glue gun melts a glue stick).

The heated filament is deposited in layers that cool and harden. These layers build up on top of each other to produce the final 3D object.

The size of the layers can be adjusted depending on the required print quality. Larger layers are used on lower quality prints and smaller layers are used on the best quality prints. The nozzle features an incredibly high resolution. The Robox nozzle can produce prints of up to 20 microns layer height.


  • Dual nozzle system.
  • Dual 0.3mm and 0.8mm Nozzles.
  • Print speeds 300% faster than closest competitors.
  • Pause and resume ability.
  • Unique valve system reduces blobs.


  • 1 x Dual Nozzle 3D Printer Head.


  • Length: 81mm.
  • Width: 52mm.
  • Height: 79mm.
  • Nozzle 1 Diameter: 0.3mm.
  • Nozzle 2 Diameter: 0.8mm.




Please note that Kitronik is an authorised distributor of the Robox product within the UK. If you are ordering from outside of the UK it may result in Kitronik refunding your purchase. If you are an international customer requiring more information on this then please get in contact.

*Whilst the Robox will allow the use of 3rd party filaments, any damage caused to the extruder or print heat due to the use of poor quality 3rd party filaments may void the warranty on these parts of the printer. If you would like to check 3rd party filament compatibility, please feel free to contact us prior to using them.

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

Related Products