This Micro USB Breakout Board offers easy access to all the USB power and data pins as they are connected to large solder-able pads on the PCB, with 0.1" spacing. The board has two further outputs where the 5V power pin is connected through a switch or the switch and a resistor. This makes the board ideal for a variety of applications such as our Micro USB Lamp Kit.
Fully compatible with Micro USB charges supplied with most mobile phones and tablets.
- 0.1" spaced pads suitable for use with standard pin strip.
- Micro USB.
- Resistor mounting holes.
- Onboard power switch.
- 1 x Micro USB Breakout, with Power Switch.
- PCB Length: 38mm.
- PCB Width: 28mm.
- Length: 38mm.
- Width: 28mm.
- Voltage Nominal: 5V.
- Voltage Range: 3.5V to 6V.
- Current Max at Nominal Voltage: 0.3A (With switch).
- Current Max at Nominal Voltage: 0.75A (Without switch).
There are no product questions yet.
Excl. VAT: £1.95 Incl. VAT: £2.34
This Logic Level Converter is a small device that safely steps down 5V...
Excl. VAT: £9.00 Incl. VAT: £10.80
This is a Breakout Board FTDI's popular FT232RL USB to UART IC. It has...
Excl. VAT: £3.85 Incl. VAT: £4.62
This 5V 5W power supply is ideal for a Raspberry Pi or mobile phone. I...
Excl. VAT: £4.99 Incl. VAT: £5.988
This kit allows you to build a mains powered lamp that takes power fro...
Excl. VAT: £6.35 Incl. VAT: £7.62
Measure currents from -25A to 25A with this board. It uses a Hall Effe...
Excl. VAT: £1.50 Incl. VAT: £1.80
1M Flat White Anti-Tangle USB Type-A to Micro-B USB Noodle Cable. This...