My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.


More Views

Kitronik Digital Barometer Breakout Board (MPL115A2)

Read the pressure with this digital barometer board; it uses a MPL115A2 IC which provides temperature compensated pressure readings accurate to 1kPa via I2C.

Availability: In Stock.

Code1+ 10+
(£7.50 incl VAT)
(£6.60 incl VAT)

This board uses a MPL115A2 digital barometer which can provide a temperature compensated pressure reading. The sensor can measure pressures between 50 kPa to 115 kPa Absolute Pressure with an accuracy of 1 kPa. The board supports a wide range of input voltages (2.4V 5.5V) and uses I2C. When selecting an input voltage to use, keep in mind that pulling the SHDN and RST pins above the input voltage will cause malfunctions. On board I2C bus pull-ups are included and can be enabled by attaching a jumper across PL2.


  • Absolute Pressure measurement from 50 kPa to 115 kPa.
  • Wide supply voltage range.
  • Digital readout via I2C.


  • 1 x Digital Barometer Breakout Board.

Possible applications include:

  • Weather stations.


  • Length: 28mm.
  • Width: 28mm.
  • Height: 3mm.


  • SDA - I2C data
  • SCL - I2C clock
  • Vcc - Supply voltage (2.375-5.5V)
  • GND - Ground pin (0V)
  • SHDN - Shutdown pin (Active low)
  • RST - Reset Pin (Active low)


This product is supplied in a bag.

Physical characteristics:

  • Length: 28mm.
  • Width: 28mm.
  • Height: 3mm.

Electrical characteristics:

  • Min supply voltage: 2.375V
  • Typical supply voltage: 3.3V
  • Max supply voltage: 5.5V
  • Typical current consumption: 5uA
  • Range: 50kPa to 115kPa
  • Resolution: 0.15kPa
  • Accuracy: 1 kPa
  • Typical conversion time: 1.6ms
  • Typical wakeup time: 3ms


There are no product questions yet.

Need a question answering before you buy? Then ask our technical team.

Ask Your Question

* Required Fields

Related Products