Description: This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It's based on piezo-resistive technology for high accuracy, ruggedness and long term stability. These come factory-calibrated, with the calibration coefficients already stored in ROM. What makes this sensor great is that it is nearly identical to its former rev, the BMP085!
This breadboard-friendly board breaks out every pin to a 5-pin 0.1" pitch header. VCC can be from 1.8V to 3.6V and is 5V tolerant; we typically run it on a clean, regulated 3.3V supply. The analog and digital supplies (VDDD and VDDA) are tied to a single header pin, but are separately decoupled. It connects to a microcontroller via I²C bus (also known as TWI, or on the Arduino, the "Wire" library).
- Digital two wire (I²C, TWI, "Wire") interface
- Wide barometric pressure range
- Flexible supply voltage range (1.8V to 3.6V)
- Ultra-low power consumption
- Low noise measurements
- Includes temperature sensor
- Low-profile with a small footprint
Excl. VAT: £1.95 Incl. VAT: £2.34
This Logic Level Converter is a small device that safely steps down 5V...
Excl. VAT: £2.59 Incl. VAT: £3.108
A basic 12 Button Keypad. The buttons are setup in a matrix format and...
Excl. VAT: £20.50 Incl. VAT: £24.60
The BigTime Watch Kit is a geekishly stylish digital watch with a velc...
Excl. VAT: £7.95 Incl. VAT: £9.54
The accelerometer board provides acceleration / orientation values for...
Excl. VAT: £4.50 Incl. VAT: £5.40
This board has the ability to drive 2 DC motors or 1 stepper motor. Pr...
Excl. VAT: £10.65 Incl. VAT: £12.78
This motor driver board for the BBC micro:bit allows two motors to be ...