A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 100mA. Short circuit protected.
This board has AAA battery clips but can use an input from 1.2V to 5V. Our lithium polymer batteries are a good, rechargable alternative.
Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable - but be sure to remove the battery!
- Thin 0.8mm PCB
There are no product questions yet. Click ask a question to be the first.
Excl. VAT: £20.00 Incl. VAT: £24.00
This is a Stretchy Conductive-knit Fabric for use in E-Textiles. It is...
Excl. VAT: £2.50 Incl. VAT: £3.00
Conductive Thread can be used like conventional sewing thread, however...
Excl. VAT: £16.50 Incl. VAT: £19.80
This is LilyPad Arduino - the main board consisting of an ATmega328 wi...
Excl. VAT: £5.50 Incl. VAT: £6.60
This is a small buzzer for the LilyPad system. It uses 2 I/O pins on t...
Excl. VAT: £3.80 Incl. VAT: £4.56
Lilypad temperature sensor. The MCP9700 is a small thermistor type tem...
Price From: Excl. VAT: £0.40 Incl. VAT: £0.48
AAA Size Zinc Chloride Batteries, suitable for heavier duty high-drain...