This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
Please note: This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable.
- 20mm outer diameter
- Thin 0.8mm PCB
There are no product questions yet. Click ask a question to be the first.
Excl. VAT: £4.99 Incl. VAT: £5.988
A simple 2.2" Flex Sensor. As the sensor is flexed, the resistance acr...
Excl. VAT: £16.50 Incl. VAT: £19.80
This is LilyPad Arduino - the main board consisting of an ATmega328 wi...
Excl. VAT: £12.00 Incl. VAT: £14.40
This is a Three Axis Accelerometer for the LilyPad system. Based on th...
Excl. VAT: £5.20 Incl. VAT: £6.24
This is a simple to use Light Sensor that outputs an analog value from...
Excl. VAT: £2.50 Incl. VAT: £3.00
This LilyPad board will light up in whatever colour you like, you can ...
Excl. VAT: £1.50 Incl. VAT: £1.80
A LilyPad Micro is like a smaller version of the LilyPad LED board. Th...