My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.


More Views

Triple Axis Accelerometer Breakout - ADXL345, no longer stocked

DISCONTINUED - This is a Breakout Board for the ADXL345 3-axis Accelerometer. It gives a high resolution measurement, accessible through either a SPI or I2C digital interface.

Availability: Out of stock

4632 £8.50
(£10.20 incl VAT)

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

You cannot buy this product. It has been replaced by: Kitronik 3 Axis Accelerometer Breakout Board (ADXL335).

This new version adds 2 standoff holes as well as an extra decoupling capacitor. Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. 

The ADXL345 is well suited to measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.

Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent pending 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation.

Note: The package incorrectly advises that this sensor works at 3.3-5 VDC. The correct voltage range for this board is 2.0-3.6 VDC.


  • 2.0-3.6VDC Supply Voltage
  • Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
  • Tap/Double Tap Detection
  • Free-Fall Detection
  • SPI and I2C interfaces


Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.


There are no product questions yet.

Need a question answering before you buy? Then ask our technical team.

Ask Your Question

* Required Fields

Related Products