Clearance prices shown in orange are in GBP and exclusive of VAT.
Running out of memory space in your Arduino project? The microSD Shield equips your Arduino with mass-storage capability, so you can use it for data-logging or other related projects. A microSD quickstart guide is available!
Update: The all new microSD shields have a voltage converter chip on-board that converts the Arduino 5V signals to 3.3V signals in accordance with SD specifications. No more 'blown up' SD cards!
Communication with microSD cards is achieved over an SPI interface. The SCK, DI, and DO pins of the microSD socket are broken out to the ATmega168/328's standard SPI pins (digital 11-13), while the CS pin is broken out to Arduino's D8 pin. If you decide to use one of the many open source FAT libraries (like FAT16 or SDFat) make sure to change the code to reflect the location of the CS pin. Most libraries assume the CS pin is connected to D10; this will have to be changed to D8. Also for the libraries to work pin D10 will have to be set as an output in the 'setup()' section of your sketch. The shield also includes a large prototyping area with a 13x12 grid of 0.1" pitch PTHs.
This shield comes populated with a microSD socket, red power indicator LED, and a reset button; but it does not come with headers installed, so you will need to solder these on.
There are no product questions yet. Click ask a question to be the first.
Excl. VAT: £7.50 Incl. VAT: £9.00
A simple Breadboard Power Supply Kit that takes power from a DC Wall ...
Excl. VAT: £1.14 Incl. VAT: £1.368
Headers for the Arduino Main Board, Arduino Pro and Arduino Mega. They...
Excl. VAT: £19.50 Incl. VAT: £23.40
The Arduino Uno has 14 digital input/output pins, 6 analog inputs, a U...
Excl. VAT: £3.99 Incl. VAT: £4.788
The ProtoShield mates with the Arduino board and provides a small sold...
Excl. VAT: £17.00 Incl. VAT: £20.40
This is a motor shield for Arduino that will control two DC motors. Ba...
Excl. VAT: £9.50 Incl. VAT: £11.40
This LCD gives you a 16x2 character LCD visual interface for your proj...