Clearance prices shown in orange are in GBP and exclusive of VAT.
The Color LCD Shield, provides an easy method of connecting the popular Nokia 6100 LCD to your Arduino USB. The board comes as shown with the 128x128 mini color LCD, as well as a backlight driver circuit (boosts to 7V), and three momentary push-buttons (tied through a jumper to pins D3-5).
Note: It is not supplied with stackable headers
The Nokia 6100 LCD is controlled through a 9-bit SPI interface. The control pins of the LCD are connected to the hardware SPI pins of the Arduino (D13 -SCK, D11 - DIO), the CS pin is tied to D9 and the reset pin is connected to D8. Voltage from the '5V' pin of the Arduino is boosted to 7V to power the LCD backlight.
The Nokia 6100 LCD is included with the Color LCD Shield. Headers are not soldered on, we recommend the 6 and 8-pin stackable headers. Note: This shield uses the Epson S1D15G10 or Philips PCF8833 controller (we cannot guarantee which one you will receive. Please see Jim Lynch's tutorial below as to why).
There are no product questions yet.
Excl. VAT: £7.50 Incl. VAT: £9.00
A simple Breadboard Power Supply Kit that takes power from a DC Wall ...
Excl. VAT: £1.00 Incl. VAT: £1.20
Headers for the Arduino Main Board, Arduino Pro and Arduino Mega. They...
Excl. VAT: £19.50 Incl. VAT: £23.40
The Arduino Uno has 14 digital input/output pins, 6 analog inputs, a U...
Excl. VAT: £17.00 Incl. VAT: £20.40
This is a motor shield for Arduino that will control two DC motors. Ba...
Excl. VAT: £4.00 Incl. VAT: £4.80
This is a Breakout Board for the 'Hall Effect' based linear ACS712 Cur...
Excl. VAT: £55.00 Incl. VAT: £66.00
DISCONTINUED - This Arduino Inventors kit is a great way to get starte...