Please note: Due to a manufacturer price increase we have been left with no alternative but to increase the price of this product. Prices therefore will differ compared to the 2016-2017 catalogue. We have sourced a cheaper 8GB version as we know that budgets don't increase in line with prices. You can find the 8GB Memory Stick, Uncased here.
This is a 16GB USB 2.0 Flash Drive/Memory Stick, uncased.
As it is sold without the case, this 16GB memory stick is ideal for school projects can design their own, or for hobbyists looking to add their own unique touch to an every day piece of hardware.
- Uncased for full customisation.
- USB 2.0 for fast data transfers.
- PCB can be shortened to fit smaller projects if required (please see datasheet below).
- 1 x 16GB Memory Stick, Uncased.
- Total Length: 60.3mm.
- Total Width: 13.5mm.
- Input Length: 14.8mm.
- Input Width: 12.2mm.
Our friends over at Autodesk sent us these USB memory stick renders produced using their Fusion 360 software. We think they look great!
USB Memory Sticks by year 8 students at Barry Comprehensive School.
USB Memory Stick cases designed and produced by students at Technology Faculty of the Kingsway Park High School.
This resource has been designed to show how you can use our uncased memory stick modules as the basis for a 3D printing project. A memory stick is a great place to start when learning how to use 3D Printers and CAD software. This is because they are small in size, meaning they are quick to print (when compared to larger designs), but can still offer a wide range of learning and design experiences.
Hi, I'm designing and making a memory stick case for my coursework and was wondering if this USB had a light on it or if you sell any with lan led light on it. Many thanks
Posted byon Tuesday, 14 February 2017
Hi Jessica, Unfortunately this USB memory stick doesn’t have a power LED and this is the only version we stock. Sorry we can’t offer any help on this product.
Hiya, your spec gives dimensions of length and width, but not the thickness (when sandwiching design together, what is the required thickness of the middle layer?). Can I assume that the thickness of the whole thing is the thickness (or less) of a standard USB input section? Many thanks.
Posted byon Friday, 11 September 2015
The PCB for the USB memory stick is very slim, only around 5mm thick. The metal connector which slots into the USB port is the same thickness as a standard USB connector.
Do you have a kit where I could solder this myself, or can I only purchase the pre-assembled one?
Posted byon Monday, 7 October 2013Hi James, we only sell the pre-assembled ones.
Hi im looking at ordering between 150-200, is there a better price for buying this quantity?
Posted byon Monday, 9 July 2012I?ve just added a price break for 100+ at ?3.50.
Excl. VAT: £2.50 Incl. VAT: £3.00
Build a computer desk ornament using this simple USB powered board. Th...
Excl. VAT: £2.50 Incl. VAT: £3.00
Build a computer desk lamp using this simple USB powered board. The Ul...
Excl. VAT: £4.95 Incl. VAT: £5.94
A 5V, 500mA Mains Plug Top Power Supply. The unit has a USB socket on ...
Excl. VAT: £0.61 Incl. VAT: £0.732
Take power from a PC with this handy USB lead. The lead is 1m long and...
Excl. VAT: £1.59 Incl. VAT: £1.908
An iPod Lead with ground, left and right channel connected to a 50cm l...
Excl. VAT: £3.50 Incl. VAT: £4.20
Standard V1.4 high speed HDMI plug to plug leads.Ethernet compatible a...