Chrome plated brass recessed holder for 5mm LEDs. Panel cut-out size 8mm dia. Complete with fixing hardware.
RoHS compliant
Write Your Own Review
Questions:
-
0voteA:
The LED would have to be fitted into the bezel from the front before it is connected to the PCB. There is a little black rubber stopper at the end of the bezel for the legs of the LED to go through.
Posted by on Monday, 9 November 2015
-
0voteA: Unfortunately they don't fit. The bezel has a rubber stopper with 2 holes in for LED legs, the RGB LEDs have more than 2 legs so you can't get them through. If you mean our colour changing LEDs with 2 legs then yes those can be used with them.Posted by on Friday, 11 April 2014
-
Excl. VAT: £0.10 Incl. VAT: £0.12 As low as: £0.038Red 5mm Diffused LED - 275mCd
Red 5mm Standard Diffused LED with a viewing angle of 60 degrees. Lumi...
-
Excl. VAT: £1.60 Incl. VAT: £1.92Panel Mount LED Clip 5mm, pack of 50
8mm in diameter, these holder clips panel mount 5mm LEDs and are sold ...
-
Excl. VAT: £0.15 Incl. VAT: £0.18 As low as: £0.084White 5mm Diffused LED - 700mCd
White 5mm Standard Diffused LED with a viewing angle of 60 degrees. Lu...
-
Excl. VAT: £0.15 Incl. VAT: £0.18 As low as: £0.084Blue 5mm Diffused LED - 500mCd
Blue 5mm Standard Diffused LED with a viewing angle of 60 degrees. Lum...
-
Excl. VAT: £0.30 Incl. VAT: £0.36 As low as: £0.192Yellow 5mm Water Clear LED - 30deg - 9500mCd
Yellow 5mm Mega bright Water Clear LED with a viewing angle of 30 degr...
-
Price From: Excl. VAT: £0.32 Incl. VAT: £0.38410mm Panel Mount LED Clip
16mm in diameter, these holder clips panel mount 10mm LEDs and are sol...
