This PCB tilt switch can be used to activate your project when it is tilted.
When horizontal this switch is off. When tilted 90 from horizontal towards the PCB legs, the tilt switch is on with all four legs active.
It has four connection points that connect to the PCB.
- Four legs at 90 to connect directly to PCB.
- Small ballbearing inside casing enables the tilt.
- Small profile - can be added to a small PCB.
- 1 x PCB Mount Tilt Switch, 90 deg. Mount (short).
- Length: 14mm.
- Width: 7mm.
- Height: 9.5mm.
There are no product questions yet. Click ask a question to be the first.
Price From: Excl. VAT: £0.48 Incl. VAT: £0.576
A Miniature Push Button Switch. Push to break with black button. Max v...
Price From: Excl. VAT: £0.62 Incl. VAT: £0.744
A Vertical PCB Mount Tilt Switch (non-mercury). Max voltage = 24V. Max...
Price From: Excl. VAT: £0.68 Incl. VAT: £0.816
A SPST Sub miniature Toggle Switch with fixing hardware. Max voltage =...
Price From: Excl. VAT: £0.22 Incl. VAT: £0.264
A Miniature PCB Mount TACT Switch. Single pole normally open contact. ...
Price From: Excl. VAT: £0.31 Incl. VAT: £0.372
A Centre Off DPDT Slide Switches with solder tag connections. Max volt...
Excl. VAT: £16.00 Incl. VAT: £19.20
The smallest Arduino-Compatible board yet! Great for rapid prototyping...