My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

250W 2 Way Passive Crossover

5.53
A passive 250W 2-way crossover made with high quality components for excellent sound reproduction.

Availability: In Stock.

Code1+ 10+
3330£5.53
(£6.636 incl VAT)
£5.11
(£6.132 incl VAT)
OR

A passive 250W 2-way crossover made with high quality components for excellent sound reproduction.

Features:

  • High quality components.
  • Excellent sound reproduction.

Contents:

  • 1 x 250W 2 Way Passive Crossover.

Dimensions:

  • Length: 86mm.
  • Width: 86mm.
  • Height: 23mm.

Physical characteristics:

  • Length: 86mm.
  • Width: 86mm.
  • Height: 23mm.

Electrical characteristics:

  • Damping: 12dB/Oct.
  • Impedance: 8 Ohms.
  • Frequency: 2.5kHz.
how_to_use_a_passive_crossover_thumb
How to use a 2-Way Passive Crossover
A crossover is the name given to a circuit that splits an audio signal into separate frequency bands. This allows different frequency bands of the output from an amplifier to be sent to different speakers instead of all being sent to one speaker.

Questions:

Posted by Chris saunders, Thursday, 26 January 2017 on product 250W 2 Way Passive Crossover
  • 0
    vote
    A:

    Hi Chris, In the blog on how to use a cross over, https://www.kitronik.co.uk/blog/use-2-way-passive-crossover/ it states that it should be used with our high powered amp kit or an equivalent amp kit. The Bluetooth kit outputs 3W per channel and as such is less than the high powered amp kit so it is unlikely that you would get the most from this crossover. The one listed in the PDF is a lower power crossover which we now don’t stock. I have advised our web team that this needs to be updated. However the connections should be as follows, + speaker output from the amp kit to the + input on the crossover, - from the amp kit to one of the common terminals on the crossover. Then the + from the woofer and tweeter go to the individual terminals on the crossover and the negative from both would go the either one of the common terminals.

    Posted by Michael Lockhart on Thursday, 26 January 2017
Posted by Robert Walker, Tuesday, 14 June 2016 on product 250W 2 Way Passive Crossover
  • 0
    vote
    A:

    You could have two woofers and two tweeters wired in series to the one crossover. However it wouldn’t increase the volume or make the sound quality any better. You would also only be able to connect the crossover up to one channel on your amplifier. As such you would be better having two crossovers, connecting one woofer and tweeter to each crossover. This would give you the best sound output result.

    Posted by Michael Lockhart on Tuesday, 14 June 2016

Ask Your Question

* Required Fields

Related Products
  • High Power Amp Kit
    Price From: Excl. VAT: £30.00 Incl. VAT: £36.00 As low as: £31.20

    High Power Amp Kit

    This Amplifier Kit can output up to 15W per channel (very loud) into a...

  • 8 ohm 50mm Speaker
    Price From: Excl. VAT: £0.72 Incl. VAT: £0.864

    8 ohm 50mm Speaker

    A low cost 50cm 0.5W 8 ohm miniature paper cone speaker. Ideal for man...

  • 8 ohm 66mm Speaker
    Price From: Excl. VAT: £0.72 Incl. VAT: £0.864

    8 ohm 66mm Speaker

    A low cost 66mm 0.5W 8 ohm miniature paper cone speaker. Ideal for man...