My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

100W 8 Ohm 130mm Kevlar Cone Woofer

7.98
DISCONTINUED - A 100W 130mm high power woofer with a reinforced Kevlar cone. Features rubber surrounds, vented magnets and heat resistant 4 layer voice coils.

Availability: Out of stock

Code1+
3324 £7.98
(£9.576 incl VAT)

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

A 100W 130mm high-powered woofer with a reinforced Kevlar cone. Incorporating rubber surrounds, vented magnets and heat resistant 4 layer voice coils, these speakers can easily handle power peaks, yet produce a smooth sound that will please any Hi-Fi enthusiast.

Features:

  • Kevlar cone.
  • Rubber surround.
  • Vented magnet.
  • 4 layer voice coil.
  • Black metal chassis.
  • Spade terminals.

Contents:

  • 1 x 100W 8 Ohm 130mm Kevlar Cone Woofer.

Dimensions:

  • Height: 75mm.
  • Diameter: 130mm.

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

Physical characteristics:

  • Height: 75mm.
  • Diameter: 135mm.

Electrical characteristics:

  • Impedance: 8 Ohms.
  • Frequency Response: 40Hz - 10kHz.
  • Volume (SPL @ 1W/1m): 84.8dB.
how_to_use_a_passive_crossover_thumb
How to use a 2-Way Passive Crossover
A crossover is the name given to a circuit that splits an audio signal into separate frequency bands. This allows different frequency bands of the output from an amplifier to be sent to different speakers instead of all being sent to one speaker.

Questions:

Posted by James, Monday, 20 June 2016 on product 100W 8 Ohm 130mm Kevlar Cone Woofer

Question:

Hi, can you confirm that the watt rating on the units are in RMS and nothing else? Many thanks, James.

Answers:

  • Posted by Michael Lockhart on Monday, 20 June 2016

    I have checked with our supplier and can confirm the rating of 100W is in RMS.

Posted by cathal, Monday, 9 May 2016 on product 100W 8 Ohm 130mm Kevlar Cone Woofer

Question:

I want to pair this woofer with the tweeter and use the crossover for a boombox. What do you recommend as an Amp? The high power one is 2 x 15W, i was thinking of using the Pi DigiAmp+ which is 2 x 35W however combined with the tweeter the max power is 140W. Do you have anything closer to this range to get the most out the speakers?

Answers:

Posted by Miss francis, Wednesday, 9 December 2015 on product 100W 8 Ohm 130mm Kevlar Cone Woofer

Question:

What type of battery do i need to power product code 3324

Answers:

Posted by zayn, Thursday, 3 September 2015 on product 100W 8 Ohm 130mm Kevlar Cone Woofer

Question:

whats the sound quality like, ok ,good ,great

Answers:

  • Posted by Michael Lockhart on Thursday, 3 September 2015

    This is a high quality woofer, however the sound quality is determined by the amplifier that is being used, the enclose it is mounted in. Also this woofer will only handle low frequency sounds, to get the most out of your amplifier you would need a twitter as well to handle the high frequencies.

Need a question answering before you buy? Then ask our technical team.

Ask Your Question

* Required Fields

Related Products