High quality 600mm x 300mm Birch Plywood sheets. Suitable for a wide range of applications, including use on a laser cutter.
This is B/BB grade Birch Plywood with B grade on the topside and BB grade on the underside. Please note: As wood is a natural product, there is often a crook or bow to the sheet. The natural twist might be in excess of 25mm (see below - Tolerances and Caution).
The B grade topside shows the natural look of the wood. There will be changes in colour that show the grain pattern. Sound, smooth knots are allowed and these will typically be under 15mm to 35mm in diameter. The surface should normally be free from open knots and plugs. This material should be suitable for paint / stain or a lacquered finish.
BB grade is similar to B grade but allows for larger knots and repairs to the face. Sound, smooth knots are allowed and these will typically be under 50mm in diameter. Open knots can be repaired with wooden plugs. The material should be suitable for applications where the visual look is not critical.
Our Birch Plywood uses an EN314-2 Class 1 glue which is suitable for interior (dry) conditions. Interior glue is generally considered the preferred option for materials that are to be laser cut. This is because the exterior glues can cause a more obvious 'burnt' look on and around the area that is cut.
Knots or resin within the material can cause scorch marks when used on a laser cutter. These can usually be removed with fine grade wet and dry sandpaper.
Although some sheets may have 2 faultless faces, some may have imperfections on both sides and therefore this product is most suitable for applications where a solid surface is needed but the visual aspects are not critical.
This material is FSC certified.
- B grade finish on topside.
- BB grade finish on underside.
- FSC certified(Forestry Standards Commission).
- Interior grade glue.
- 1 x 3mm Birch Laser Plywood, 600mm x 300mm Sheet.
- Length: 600mm.
- Width: 300mm.
- Height: 3mm.
The manufacturing tolerance for the thickness of plywood sheets are the stated thickness +0.3mm/-0.4mm. This means a 3mm plywood sheet could be between 2.6mm and 3.3mm in thickness.
- As wood is a natural product there is often a bow or crook to plywood, and in some cases a twist. We have measured curvature as much as a 25mm rise between the flat center of the plywood and the corner, therefore if using on a laser cutter these sheets should be strapped/taped to the laser bed before cutting.
- On all Plywood and Perspex Sheet Orders (excluding A4 size) there is a flat delivery charge of £6.50 per order.
How many 600mm x 400mm, 3mm ply sheets will I need to cover 15m2
Posted byon Friday, 22 January 2016
This would depend on the length and width of the area you want to cover, you can use an online calculator to work how many sheets you would need based on the measurements of the area, such as this one http://www.diy.com/help-advice/tiling-calculator/Dev_npcart_100007.art.
Excl. VAT: £3.75 Incl. VAT: £4.50
6mm Birch Laser Plywood Sheet, 600mm x 400mm. BB grade on topside and ...
Excl. VAT: £0.75 Incl. VAT: £0.90
3mm Birch Laser Plywood Sheet. B grade on topside, BB grade on undersi...
Excl. VAT: £0.97 Incl. VAT: £1.164
6mm Birch Laser Plywood Sheet. B grade on topside, BB grade on undersi...
Excl. VAT: £2.50 Incl. VAT: £3.00
A 3mm laser grade Poplar Plywood Sheet. AB grade with a consistent su...
Excl. VAT: £3.75 Incl. VAT: £4.50
A 6mm laser grade Poplar Plywood Sheet. AB grade with a consistent su...
Excl. VAT: £1.30 Incl. VAT: £1.56
3mm laser compatible MDF Sheet. Dimensions 600mm x 400mm. They are EU ...