My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

6mm Birch Laser Plywood, 400mm x 290mm sheet, pack of 10, no longer stocked

13
DISCONTINUED - 10 x 6mm Birch Laser Plywood Offcuts. Mainly solid face veneers with some repaired knots. Larger open knots are repaired using wooden plugs. 400mm x 290mm.

Availability: Out of stock

Code1+
3204 £13.00
(£15.60 incl VAT)

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

Note: This product is only available until stock is exhausted and can only be ordered online.

These offcuts are BB grade Birch Plywood Sheets suitable for a laser cutter.

BB grade means mainly solid face veneers with some small repaired veneer splits and knots. Larger open knots are repaired using wooden plugs. Additionally some solid light and dark knots are admissible (see example pictures below).

Knots or resin within the material can cause scorch marks when used on a laser cutter. These can usually be removed with fine grade wet and dry sandpaper.

Although some sheets may have 2 faultless faces, some may have imperfections on both sides and therefore this product is most suitable for applications where a solid surface is needed but the visual aspects are not critical.

Features:

  • BB grade finish.

Contents:

  • 10 x 6mm Birch Laser Plywood, 400mm x 290mm Sheets (Offcuts).

Dimensions:

  • Length: 400mm.
  • Width: 290mm.
  • Height: 6mm.

Example imperfections:

Caution:

  • All effort is made to keep these sheets flat though some sheets may have slight bends or curves. These should be strapped/taped to the laser bed before cutting.

Please note: this product has been discontinued and is present for reference only. It is not possible to buy this product.

Questions:

There are no product questions yet.

Need a question answering before you buy? Then ask our technical team.

Ask Your Question

* Required Fields

Related Products