Solenoid (5V)

Stock code: 2540
filler

Pricing:Ex VATInc VAT
1+ £6.85
(excl. VAT)
£8.22
(inc. VAT)
Stock:
In stock

Description

Same Day Dispatch

  • Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

UK Deliveries

  • If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
  • If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate: remote area list.
  • If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.

Rest of the world

  • These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
  • Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

  • If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

Q:
How can this component be integrated to a circuit- given the PH connector?
Asked by: Kate
A:
Hi Kate, Thank you for your question, you could cut the connector off and once you used a multimeter to work out the positive and negative wire you could wire them into the circuit that way. Best Regards Cullen
Answered by: Cullen Lewis
08-Feb-19

Q:
How much force dose this have? And how much current do you need for max for Example?
Asked by: Paul Meynell
A:
Hi Paul, this would depend on your supply voltage and also the duty cycle at which you would set this to. If it was based on a 5V supply voltage you could obtain approximately a 300gf as a maximum, however this would only be moving around 0.5mm and based on needing 12W would be around 2A. You could only sustain this for a 10% duty cycle, as such it could only do this for 1 second in a 10 second period. If you were wanting a constant cycle you could achieve around 80gf as a maximum moving a similar distance on the stroke. The bottom graph in the datasheet shows how the force is effected by the distance the solenoid moves.
Answered by: Michael Lockhart
28-Nov-18

Q:
Can this be driven directly by the BBC micro:bit? If not, do you have a relay for the micro:bit that can drive it?
Asked by: JT
A:
Hi there, Thank you for your question. In theory yes if your solenoid was low enough current it would work but it would need to be 5-10mA of current draw as the micro:bit cannot supply a lot directly. You would need to instead use one of our BBC micro:bit Motor Driver Board, our BBC micro:bit Robotics board or the Monk Makes Relay Board we sell. These are linked below https://www.kitronik.co.uk/46123-low-voltage-relay-for-microbit-solid-state.html https://www.kitronik.co.uk/5620-motor-driver-board-for-the-bbc-microbit-v2.html https://www.kitronik.co.uk/5641-all-in-one-robotics-board-for-bbc-microbit.html Best Regards Cullen
Answered by: Cullen Lewis
22-Oct-18

Q:
Could you suggest a suitable MOSFET to drive this from a PICAXE18M2?
Asked by: andrew
A:
Hello Andrew, Unfortunately we don't have any MOSFET, also depending on the application that the solenoid is being used in would depend on what item you would require.
Answered by: Michael Lockhart
02-Jan-18

Q:
Do you have PUSH type solenoid?
There is a pull type solenoid on the picture above.
Asked by: Vadim
A:
This solenoid is the push type. The image is however just a stock photograph provided by the manufacturer for the entire range of solenoids.
Answered by: Aaron Sturman
28-May-14

Ask a question about this product




Payment & Security

American Express Apple Pay Diners Club Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed