Strip boards are ideal for prototypes or projects. Boards have a 0.1” pitch hole spacing and hole diameter of 1mm.
This board is 160 x 100mm (35 strips x 61 holes).
Pack of 5.
The board is also available in a larger size.
Questions:
-
0voteA: It should work fine, I can't see any reason why it wouldn't. I'd test it with one first though before ordering lots.Posted by on Friday, 11 April 2014
-
0voteA: Hi Charlie, you don't need copper tape for this. The strip board has strips of copper which run the length of the board, by cutting these you can make various circuits.Posted by on Friday, 11 April 2014
-
Excl. VAT: £2.95 Incl. VAT: £3.54 As low as: £2.52Small Prototype Breadboard - PBU301
Components and wires can be placed into the board - the circuit can be...
-
Excl. VAT: £1.00 Incl. VAT: £1.20 As low as: £1.02Copper Clad Board, 100 x 160 mm
Single-sided Copper Clad Board, 1.6mm thick. Suitable to use with Ferr...
-
Excl. VAT: £2.89 Incl. VAT: £3.468 As low as: £3.108Economy Photo Resist Board SS 100 x 160 mm
Make Printed Circuit Boards with this Single-sided Copper Clad Board t...
-
Excl. VAT: £2.25 Incl. VAT: £2.70 As low as: £2.46Strip Board 100 x 250mm
Strip boards are ideal for prototypes or projects. Boards have a 0.1" ...
-
Excl. VAT: £2.70 Incl. VAT: £3.24 As low as: £3.00Stripboard Cutter
A handy Strip Board Cutter that is used to break the tracks on strip b...
-
Excl. VAT: £19.99 Incl. VAT: £23.988 As low as: £22.788Soldering Iron (Mains Powered) 18W
The CS18 18W Soldering Iron (240V AC Mains Supply) is perfect for most...
