My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

2268_large_battery_box_switch_x2aa

More Views

2x AA Covered Battery Holder with Switch and Connector

0.65
This Switched Battery Holder takes 2 AA batteries and comes compete with a terminal connector on the end of the wires.

Availability: In Stock.

Code1+ 10+ 100+
2268£0.65
(£0.78 incl VAT)
£0.55
(£0.66 incl VAT)
£0.50
(£0.60 incl VAT)
OR

This 2x AA battery, switched battery holder come compete with a terminal connector on the end of the wires. These are perfect for connecting LEDs without the need for soldering.

The batteries are fully enclosed in plastic case, which is secured in place by a small screw. The unit incorporates a small on / off switch. The leads are approximately 130mm in length and colour red and black to show the polarity of the connector.

Resources:

Questions:

Posted by Harrison, Wednesday, 1 March 2017 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A:

    Hi Harrison, the dimensions of this product are approximately 68mmx33mmx19mm.

    Posted by Michael Lockhart on Wednesday, 1 March 2017
Posted by Simon Routledge, Wednesday, 4 January 2017 on product 2x AA Covered Battery Holder with Switch and Connector
Posted by Kirk Skillings, Monday, 24 October 2016 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A:

    Hi Kirk,

    It's a JST connector, 2mm pitch.

    Posted by Rob Haywood on Monday, 24 October 2016
Posted by rob blair, Wednesday, 20 January 2016 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A:

    We have now been able to source a battery cage with a JST connector, we are currently in the process of adding this item into our stock and onto the website. We are hopeful this we will be on the website and available to purchase by the end of the month.

    Posted by Michael Lockhart on Wednesday, 20 January 2016
Posted by Harry, Monday, 21 December 2015 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A:

    This battery box would produce approximately 3V, when the batteries are new.

    Posted by Michael Lockhart on Monday, 21 December 2015
Posted by Tom, Wednesday, 9 December 2015 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A:

    This battery holder unfortunately isn’t BBC micro:bit compatible, we are in the process of adding a battery cage with the correct size connector on, this should be available in the new year.

    Posted by Michael Lockhart on Wednesday, 9 December 2015
Posted by Terry, Monday, 8 July 2013 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A: That would depend on the bezel. Is there a specific one you have in mind?
    Posted by Aaron Sturman on Monday, 8 July 2013
Posted by Terry, Monday, 8 July 2013 on product 2x AA Covered Battery Holder with Switch and Connector
  • 0
    vote
    A: Our 5mm flashing LEDs all have a forward voltage of 3V to 4.5-5V so you would not need a resistor. 2xAA batteries will provide approximately 3V although this will drop as the batteries run down.
    Posted by Aaron Sturman on Monday, 8 July 2013
  • 0
    vote
    A:

    Hi Susan, No there isn’t anything that would stop the current flowing in either direction. However you would want to include a diode into the connection to make sure the batteries don’t discharge into the solar cell.

    Posted by Michael Lockhart on Wednesday, 22 March 2017

Ask Your Question

* Required Fields

Related Products