Once built this timer board can be used with your choice of 8 pin PIC processor and flowchart software. It's compatible with most educational PICs and software. The kit has a start switch as well as LED and sounder outputs. Programming is via a 3.5mm jack interface. This kit also requires a Processor which is not included in the kit.
Four tasks have been devised from a basic timer, to one where the delay is configurable by the user, it warns that time is almost up and then plays a tune upon time out.
Please see the timer tasks resource page for full details of these tasks and to download programming guides and example tasks.
- Solder this board together, choose a microcontroller and you're ready to produce a program to take control of the switch, LED and sounder.
- It's compatible with most educational PICs and software.
- Programable via a 3.5mm jack interface.
- 1 x 3.5mm PCB Mount Jack Socket.
- 1 x 330Ω Resistors.
- 1 x 10KΩ Resistors.
- 3 x 22KΩ Resistor.
- 1 x 5mm Red LED.
- 1 x 8 Pin IC Holder.
- 1 x Push To Make Switch.
- 1 x Piezo Buzzer.
- 1 x PP3 Clip Lead.
- 1 x 3AA Battery Holder.
- 0.5m Connecting Wire.
- 1 x Programmable Timer PCB.
- PCB Length: 46mm.
- PCB Width: 36mm.
- This kit requires some soldering.
- This kit also requires a Processor which is not included in the kit.
Teachers can order a sample of this kit (one per school) here. You will need to select the kit from a list of all the sample kits; the stock code for this kit is 2121.
Note: this service is only offered to schools for evaluation purposes only.
This kit is designed and manufactured in the UK by Kitronik.
Hi, a motor would draw too much current and damage the PIC. You need a programmable board that can supply enough current for a motor, you might want to take a look at our Bump and Spin Kit.Posted byon Thursday, 2 October 2014
0voteA: There are programming resources to accompany this kit. These consist of pre-written programs, and tasks to build up the programs in stages and offer an excellent way of getting people started doing programming. There is a link to the resource page in the product description.Posted byon Friday, 15 June 2012
Excl. VAT: £4.17 Incl. VAT: £5.004
Program the Music Box Kit to a tune of your choice using PIC Processor...
Price From: Excl. VAT: £0.46 Incl. VAT: £0.552
AA size Zinc Chloride Batteries, suitable for heavier duty high-drain ...
Excl. VAT: £1.30 Incl. VAT: £1.56
A Low Inertia Motor, ideal for low power applications such as solar pr...
Excl. VAT: £2.49 Incl. VAT: £2.988
Self-assembly board allowing prototyping of PICAXE-08 circuits. A prot...
Excl. VAT: £3.00 Incl. VAT: £3.60
DISCONTINUED - The PICAXE Programming Editor Software allows programs ...
Excl. VAT: £1.75 Incl. VAT: £2.10
A PICAXE-8M2 programmable IC. The IC has 8 pins, a program memory (byt...