Switched coin cell holder

Products > Textiles & Craft > E-Textiles & Conductive thread > Power Boards > Switched coin cell holder
Click image for larger image and to view more images if available.
Switched coin cell holder

This specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread.

These are clearly marked to show the battery polarity. The unit also has a small power switch so that you can turn the power on and off.

It uses a very thin PCB material to keep its size to a minimum. This allows it to be easily incorporated into your own e-textiles designs.

Caution: This coin cell holder contains Nickel and should not be used in designs where it will be in prolonged contact with the skin.

The board accepts CR2032 batteries.

Dimensions: L44 x W20 x H4.5mm

For more information and examples showing you how to use these parts in a e-textiles design visit our dedicated e-textiles section.

Kitronik Exclusive
Note: Mouseover the price to see the Euro price.
DescriptionCode 1+ 10+ VAT
Switched coin cell holder2711
£1.85
£2.22
£1.55
£1.86
 ex VAT
inc VAT
*
  Current stock availability: 40

Ask a question about product:

Posted by Ian Lewis on Jun 20th, 2012
Is this for the CR2032 size battery?
Response by geoffhampson on Jun 20th, 2012
Yes it takes the CR2032 coin cell. A suitable coin cell is shown in the related products at the top left of the page.
Posted by Sam Wilkinson on Dec 5th, 2012
Hi,
Have you got some form of technical data sheet for this product and its corresponding battery?
Thanks
Sam Wilkinson
Response by geoffhampson on Dec 5th, 2012
There isn’t a datasheet for the holder, the dimensions are L44 x W20 x H4.5mm. Specifically what data were you looking for?
The coin cell is 20mm across, 3.2mm high and has a capacity of 200mA/h. Again what did you need to know?
Leave a Reply



(Your email will not be publicly displayed.)

Please type the letters and numbers shown in the image.
Captcha Code

Click the image to see another captcha.