Easter & Bank Holiday Information: Kitronik is closing for the Easter bank holidays, orders placed after the Thursday cut off will ship Tuesday 2nd April.

PVC Sheet 20x20cm, with Adhesive

Save 44%
Stock code: 4342-01
filler

Pack Size: Single
Pricing:Ex VATInc VAT
1+ £0.45
(excl. VAT)
£0.54
(inc. VAT)
Was £0.80 £0.96
Stock:
Discontinued - This page is for reference for existing customers of this product. It is not possible to buy this item.

Description

Same Day Dispatch

  • Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

UK Deliveries

  • If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
  • If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate: remote area list.
  • If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.

Rest of the world

  • These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
  • Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

  • If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

Please note: Instructions for using this product (if available) can be found under the product description.
A Guide On Using Laser Materials

A selection of articles describing various aspects of working with laser materials.

A Guide On Using Laser Materials

A selection of articles describing various aspects of working with laser materials.

Q:
Dear Sir, I am looking for a thin transparent material on a roll to use as glass protector for the viewing glass on my sand blast machine. It needs to be around .010? thick. We did have a supplier but they have now gone unfortunately. Would you have something that may be of use? Rgds J Jacques
Asked by: J Jacques
A:
Hi John, sorry all we have anywhere near that thickness is this PVC and we only have it in 200x200mm
Answered by: Aaron Sturman
30-Sep-13

Q:
Is this available in other sizes? if so how large could I have it?
Asked by: David Sami
A:
We only do the one size 200 x 200 mm.
Answered by: Geoff Hampson
23-Jan-13

Q:
but I f i were to make holes with a hot tip I could then hand stitch the conductive thread?
Asked by: penni
A:
Yes if you were to pre-drill, laser cut or melt holes in the material then yes it would be possible to stich in the conductive thread.
Answered by: Geoff Hampson
19-Dec-12

Q:
Can this be used flat and cut to a smaller size? Can the LEDs be attached to the edge so that the light travels up the sheet?
Asked by: Helen
A:
It could be used flat and is easy to cut to size with scissors or a knife. Whilst you might be able to get the light to work on the edge I think you will have better results with the light shining on to the material. I'd give it a try and see what gives you the best results.
Answered by: Geoff Hampson
28-Nov-12

Q:
Do you offer a cutting service as i would like these sheets 400 x 450 is so please could you tell me how much they would cost? Many thanks Trev
Asked by: Trevor Kearl
A:
We don't do a cutting service, however we do have a sheet size of 800 x 450mm which would just need to be cut in half. (You will loose a few mm, depending on the blade size).
Answered by: Geoff Hampson
19-Sep-11

Q:
Hi there...in your booklet it shows a black rim around the top and base of the projects, are these items for sale via your as well? Steve
Asked by: steve
A:
The black plastic rims shown in the June update are not currently available. However we are looking to get these in and supply them with a sheet of frosted PVC in a size suitable for use with the ends. We are currently talking to the manufacturer about supplying these and we will hopefully soon be adding them to the website.
Answered by: Geoff Hampson
13-Jun-11

Q:
Hi, I wanted to know what colours are available in this 10 pack. If they arent coloured, how do you make it pink (like in the display pic)?
Asked by: Charlese
A:
The sheet is a clear plastic sheet with a frosted finish (left image). Placing a colour changing LED in the base of the sheet give the effect that you with the pink (right image)
Answered by: Geoff Hampson
05-Apr-11

Ask a question about this product




Payment & Security

American Express Apple Pay Diners Club Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed