Easter & Bank Holiday Information: Kitronik is closing for the Easter bank holidays, orders placed after the Thursday cut off will ship Tuesday 2nd April.

Motors (High Torque)

Stock code: 2507
filler

Pack Size: Pack of 10
Pricing:Ex VATInc VAT
1+ £6.75
(excl. VAT)
£8.10
(inc. VAT)
Stock:
In stock

Description

AttributeValue
Operating voltage 1.5V to 6.0V
Axle diameter 2mm
Typical speed 7930 RPM
Typical current 760mA
Dimensions 30.5mm, dia 24mm, shaft 10mm dia 2mm
Mountable using x2 M3 bolts.

Same Day Dispatch

  • Orders placed online before 3:00pm Monday - Friday (excluding public holidays and our Christmas shutdown period) are always dispatched the same day provided the goods are in stock. If the goods are not in stock we will endeavour to contact you as soon as possible to discuss a dispatch date.

UK Deliveries

  • If you live on the UK mainland and don't have any large materials or lithium batteries in your order it will cost £3.95 (£4.74 including VAT) if you spend less than £40 (£48 including VAT).
  • If you spend between £40 and £200 (£48 - £240.00 including VAT, excluding large materials or lithium batteries) delivery is free to most locations, £12 (£14.40 including VAT, excluding large materials or lithium batteries) to Northern Ireland and £15 (£18.00 including VAT, excluding large materials or lithium batteries) to UK remote locations. For a list of postcodes that will be charged the remote location rate: remote area list.
  • If you spend over £200 (£240.00 including VAT, excluding large materials or lithium batteries) delivery is free within the UK.

Rest of the world

  • These orders are sent via UPS, and the cost is dependant on the service you choose at checkout. Alternatively you can choose the free collection option and have your own courier collect it from us. International orders can only be shipped to the registered card address. Please note: International orders may be charged import duty dependant on local import laws and duty rates. These charges are usually billed to you directly from UPS.
  • Delivery times vary for international orders depending on the service selected and the destination. You can see the delivery time and cost at the shipping stage, or by using the shipping estimator from within the shipping basket.

Collection

  • If you would like to collect your order, or use your own courier then there is an option you can select during checkout. We do not charge a packaging or handling fee for this service, and you will receive an email when your order has been processed, you can collect half an hour after receipt of this email.

Further Information

Q:
Hello,
I'd like to run a class project turning a DC motor into a generator to power an LED. Initially it will be hand-cranked, with a large cranked pulley driving a tiny pulley on the motor to step up the speed. Which of your DC motors would be most suitable for this application? As always, the lower end of the price range is better.
Thanks,
Doug
Asked by: Douglas Grainger
A:
Hi Doug,

Thank you for your question it would be best to use one of our geared motors on the link below but even then it is quite difficult to generate the required voltage and current to light the LED.

https://www.kitronik.co.uk/2586-n20-series-micro-metal-gearmotor-2981.html

Best Regards

Cullen
Answered by: Cullen Lewis
12-Mar-20

Q:
Where do the m3 bolts go in order to mount the motor? Can't quite tell from the picture. Thanks
Asked by: Tony
A:
Hi Tony, The motor can be fixed in place by the holes on the front of the motor. However it does appear we reference the incorrect size mounting and it may be a M2.5 bolt. We on working on getting this corrected with the correct size. Another alternative for mounting is a mounting clip, such as this https://www.kitronik.co.uk/2505-plastic-motor-mounting-clips-pack-of-10.html
Answered by: Michael Lockhart
30-Apr-18

Q:
Is this motor suitable to drive a small bbq roasting spit powered by 2x1.5 batteries.? Thank you, Eddie.
Asked by: Eddie
A:
I believe that the motor should be ok. I believe you will have to use some form of gearing to slow the rotation as I doubt you will want your spit to rotate at 7930 RPM which the motor does under no load.
Answered by: Geoff Hampson
05-Apr-11

Ask a question about this product




Payment & Security

American Express Apple Pay Diners Club Google Pay Maestro Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed